Heat and humidity kept to a minimum

E.A.R.S is a closed loop system, only drawing in
ambient air when there is insufficient return air available. By recycling cooler and dryer air from the pneumatic tools (under pressure), the compressor runs cooler, and run times are shorter, decreasing wear and tear. This closed loop operation drastically reduces the moisture
content in the compressed air supply. The more you use your pneumatic tools, the cleaner and dryer the air becomes.

Clean air with less noise

With conventional compressed air systems,
contaminants infiltrate exhausted air and considerable noise is emitted from the air tools. Even when filters and silencers are installed, noise levels can still exceed 120 decibels, levels that are hazardous to the operator as well as others in the vicinity. Studies have shown
hearing loss at these noise levels can occur after only a few hours.

More than 4 million people employed worldwide are subjected to dangerous sound levels in the workplace. It has been shown that nearly 10,000 people employed suffer annually from noise induced hearing loss. Noise reduction in the workplace should be a top priority, and
to begin, you need to go to the source of the emission - the exhaust of conventional pneumatic tools.

The contaminants emitted from the air tool are a health and safety risk. Inhaling the exhaust air from the tools can mean breathing in rust, oil, mold, chemicals and fine particles from the compressed air tank and the wear of pneumatic tools.

The closed loop nature of E.A.R.S changes this
equation decisively. Because the exhaust air is fed back to the compressor, emissions of dirty air and noise are eliminated. This dramatically improves the working environment and becomes a cleaner, quieter place.